Simrad DX45 - Index

DX45/60 Radar scanner Index
About this manual II
Agents end of manual
Alarms/warnings V
Cables:
- connecting 1-6
- interconnecting 1-7
- pin numbers 1-9
- power III,
- wire colors 1-9
Cleaning (surface) IV
Converting mm to inches 1-3
Declaration of conformity
end of manual
Display unit II, 4-1,4-3
Fuses 1-6,4-1,4-3
Heading adjust
High voltage III
Initial start-up 2-1
- time to warm up 2-1
Installation:
- dip angle 1-2
- obstacles 1-2
- of scanner 1-1
- site 1-1
Maintenance safety III
Mounting:
- bolt size 1-3,1-5
- DX45 Radome scanner 1-4
- DX60 Radome scanner 1-5
- of scanner 1-3
- supporting pads for DX60 1-5
- tighten the bolts 1-4,1-6
- tighten the screws 1-7
Radar operation 3-1
- blind sectors 3-5
- effects of ship’s movement 3-2
- environmental effects 3-3
- false echoes 3-6
Radar operation - continued,
- from display unit 2-1
- interference 3-6
- navigational echoes 3-4
- orientation 3-1
- picture 3-1
- racon (Radar Beacon) 3-4
- Sea return 3-4
- shadow effect 3-5
- side lobes 3-6
- Standby 2-2
- storm and rain squall returns 3-5
Radar system:
- grounding 1-10
- typical II
Repair and service IV
RF radiation II
Routine check III
Safety notices II
Specifications:
- DX45 Radome scanner 4-1
- DX60 Radome scanner 4-3
Standard equipment list 1-1
Static electricity III
The Golden Rule 3-7
Troubleshooting IV
Warnings/alarms V
War ranty end of manual