Simrad DX45 - Go to Standby; Resume Radar Transmission from Standby

Initial start-up 2-2 Radar scanners DX45/60
2.2.1 Go to Standby
To disengage the radar transmission temporarily, you can return the
radar function to Standby mode:
ENT
Call up the Radar quick menu
GOTO
Enter Standby mode
2.2.2 Resume radar transmission from Standby
To resume the radar transmission:
ENT
Call up the Radar quick menu
GOTO
Start transmission
2.2.3 Resume radar transmission from Standby
To shut down the radar function
ENT
Call up the Radar quick menu
RADAR
Turn ‘Power off’