Simrad NSS8 - Backing up Your System Data

|
63
Maintenance | NSS Installation Manual
Backing up your system data
Waypoints, routes, tracks that you create are led on your system. It is recommended to regu-
larly copy these les and your system settings les as part of your back-up routine.
The les are copied to a Micro-SD card inserted in the card slot on the front of your unit.
Dierent output formats are available:
User Data File version 4 This is best used when transferring data from one
NS* system to another, since it contains all the extra
tid bits of information these systems store about
items.
User Data le version 3 ( with depth) Should be used when transferring user data from an
NS* system to a legacy Lowrance ( LMS, LCX, etc )
User data le version 2 (no depth)
GPX (GPS Exchange) This is the format most used on the web that shares
among most GPS systems in the world. Use this
format if you are taking data to a competitors unit.
Northstar.dat (no Tracks) Used to transfer data to a legacy Northstar device.
The example shows how to export waypoints, routes and tracks. Selection is done by using
the rotary knob or the menu.
1.
Select les
2. Press the rotary knob to access the export dialog, and select the le format you want to export to
3. Select destination folder
4. Enter name for exported le