Need help?Do you have a question about the Simrad StructureScan LSS-1 and is the answer not in the manual?
General| Frequency | 455/800 kHz |
|---|---|
| Beam Width | 0.5° (along track) x 50° (athwart track) |
| Interface | Ethernet |
| Weight | 2.2lbs (1kg) |
| Type | Side Imaging Sonar |
| Compatibility | Simrad NSS |
| Power Consumption | 1.5A |
Cautions users about modifications and potential interference issues, recommending corrective measures.
Lists items included with the LSS-1 module, such as the black box module and cables.
Lists necessary tools like a drill, screwdriver, and pencil for installation.
Explains the status and meaning of the indicator lights on the LSS-1 module.
Provides guidance on choosing an optimal installation site, considering interference and environmental factors.
Details how to physically mount the LSS-1 module, including cable management and drip loops.
Explains the wiring process, including safety precautions for connecting/disconnecting cables.
Describes connecting the LSS-1 unit to a display unit via Ethernet.
Details how to connect the StructureScan transducer to the LSS-1 module.
Explains how to connect the LSS-1 to the vessel's power source, including recommended configurations.
Lists available spare parts for the LSS-1 module, such as the module itself and power cables.
Lists optional accessories like transducers, extension cables, and Y-cables.
Details the physical dimensions, weight, and material of the LSS-1 module.
Covers operating and storage temperatures, waterproof rating, and compliance.
Outlines power supply, voltage input, fuse rating, and transmit power specifications.
Specifies Ethernet port count and shared device support.
Lists the number of supported transducers and operating frequencies.
Provides detailed dimensional drawings of the LSS-1 module with measurements.
To Next Page
