Need help?Do you have a question about the Simrad NSS7 and is the answer not in the manual?
General| Screen Resolution | 800 x 480 pixels |
|---|---|
| Chartplotter | Yes |
| Ethernet Ports | 1 |
| NMEA 2000 | Yes |
| Screen Size | 7 inches |
| Operating Frequency | 50/200 kHz |
Provides guidance on how to use the manual and its conventions.
Details the function of each button and control on the front panel.
Identifies and describes the connectors on the rear of the display unit.
Illustrates a typical system configuration for NSS7 and NSS8 models.
Illustrates a typical system configuration for the NSS12 model.
Covers initial steps and tools required for installation.
Ensures all included components are present before proceeding.
Guidance on selecting the optimal placement for the display unit.
Instructions for flush mounting the display unit into a panel.
Instructions for mounting the display unit using a bracket.
Important rules and best practices for connecting cables.
Details the fundamental wiring for powering the unit.
Explains wiring for controlling power states of the unit and other devices.
Instructions for connecting an external alarm device.
Guidance on selecting an optimal location for GPS antenna reception.
Details on the built-in echosounder functionality.
Information on connecting optional external echosounder modules.
Provides adapter cable options for various transducers.
Configuration options for the echosounder system.
Details on the Broadband radar scanner types.
Details on the HD radar system components.
Configuration and adjustment options for the radar system.
Instructions for connecting composite video cameras.
Settings for optimizing video display and input.
Wiring diagram for serial balanced NMEA 0183 connections.
Wiring diagram for single ended NMEA 0183 connections.
Configuration of the NMEA 0183 serial port settings.
Connecting devices to the NMEA 2000 network.
Guidance on designing and installing the NMEA 2000 backbone.
Instructions for supplying power to the NMEA 2000 network.
Information on converting data between NMEA protocols.
Configuration steps for the NMEA 2000 / SimNet network.
How to connect a single network device via Ethernet.
Expanding Ethernet connectivity for multiple devices.
Configuration settings for the Ethernet network port.
Details on connecting the autopilot computer and components.
Configuration, calibration, and testing procedures for the autopilot.
Configuration steps for integrating CZone modules with the NSS.
Procedure for backing up user data and settings.
Instructions for updating the NSS unit's software.
Updating firmware for NMEA 2000 and Ethernet network devices.
Procedure for calibrating the touch screen interface.
Physical dimensions and cutout details for the NSS7 model.
Physical dimensions and cutout details for the NSS8 model.
Physical dimensions and cutout details for the NSS12 model.
Pinout details for the power input connector.
Pinout details for video input and data ports.
Pinout details for the NMEA 2000 network connector.
Pinout details for the Ethernet network port.
Pinout details for the echosounder transducer connection.
Part numbers and descriptions for NMEA 2000 cables.
Part numbers and descriptions for Ethernet cables.
List of NMEA 2000 Parameter Group Numbers (PGNs) supported.
List of NMEA 0183 sentences transmitted and received.
Recommendations for proactive care of the unit.
Routine procedures for cleaning and checking the unit.
Guidance on diagnosing and resolving common operational issues.
Procedure for backing up system data and settings.
To Next Page