|
63
Maintenance | NSS Installation Manual
Backing up your system data
Waypoints, routes, tracks that you create are led on your system. It is recommended to regu-
larly copy these les and your system settings les as part of your back-up routine.
The les are copied to a Micro-SD card inserted in the card slot on the front of your unit.
Dierent output formats are available:
User Data File version 4 This is best used when transferring data from one
NS* system to another, since it contains all the extra
tid bits of information these systems store about
items.
User Data le version 3 ( with depth) Should be used when transferring user data from an
NS* system to a legacy Lowrance ( LMS, LCX, etc )
User data le version 2 (no depth)
GPX (GPS Exchange) This is the format most used on the web that shares
among most GPS systems in the world. Use this
format if you are taking data to a competitors unit.
Northstar.dat (no Tracks) Used to transfer data to a legacy Northstar device.
The example shows how to export waypoints, routes and tracks. Selection is done by using
the rotary knob or the menu.
1.
Select les
2. Press the rotary knob to access the export dialog, and select the le format you want to export to
3. Select destination folder
4. Enter name for exported le
To Next Page
Loading...
Need help?
General