Need help?Do you have a question about the Simrad NSS evo3 and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| NMEA 0183 Connectivity | Yes |
| Operating System | Linux-based |
| Chartplotter | Yes |
| Radar Support | Yes |
| Waterproof Rating | IPX7 |
| Operating Temperature | -15°C to +55°C |
| Display Size | 9, 12, 16 inches |
| Screen Type | LCD |
| GPS | 10 Hz built-in GPS receiver |
| Networking | Ethernet, Wi-Fi, Bluetooth |
| Sonar | CHIRP, StructureScan |
| Power Supply | 12V DC |
| Video Input | 2 |
| Card Slots | 2 x MicroSD |
| Processor | Quad-core processor |
| RAM | 1GB |
| Internal Storage | 8GB |
| Resolution | 1280 x 800 (12") |
Details basic interactions like tapping and pressing.
Describes navigation within menus and dialog boxes.
Details how to mark the vessel's position in an emergency.
Explains the main interface for chart display and navigation.
Explains cursor functions for selection and measurement.
Guides on planning and saving navigation paths.
Covers the creation, editing, and navigation of routes.
Explains automated route planning features.
Describes how to record and view vessel movement history.
Describes the display of navigation information.
Explains how to set a destination using the cursor.
Guides on following a pre-planned route.
Explains integration with autopilot systems for navigation.
Covers various parameters affecting navigation performance.
Emphasizes autopilot as an aid, not a replacement navigator.
Explains how to engage the autopilot system.
Describes various steering modes like AUTO, NAV, and WIND.
Details steering to a set heading using the compass.
Explains steering to a waypoint or route using GPS data.
Describes sailing-specific steering based on wind data.
Explains sail-specific maneuvers for changing direction relative to wind.
Explains how the autopilot can follow seabed contours.
Covers user-configurable parameters for autopilot behavior.
Explains the display interface for radar information.
Details modes like Power off, Standby, and Transmit.
Explains how to adjust the radar's detection distance.
Explains cursor functions for target selection on radar.
Guides on optimizing radar display quality.
Describes preset modes for different environments (Harbor, Offshore).
Covers detailed settings like Noise Rejection and Target Expansion.
Explains how to customize the radar display elements.
Describes defining areas for alarm detection.
Explains the Mini Automatic Radar Plotting Aid for tracking targets.
Covers options for customizing radar display and behavior.
Explains the display of underwater sonar data.
Details cursor functions for sonar data interaction.
Covers configuration options for the sonar display.
Details how to adjust image contrast and sensitivity.
Guides on beginning to record sonar data.
Explains how to end sonar data recording.
Covers system configuration for sonar sources.
Describes the high-resolution sonar display.
Details cursor interaction with sonar data.
Guides on marking locations from StructureScan data.
Covers configuration options for the sonar display.
Describes overlaying sonar data onto charts.
Explains how to enable sonar data on charts.
Explains how to process sonar logs into map files.
Explains the forward-looking sonar display.
Covers configuration options for the sonar display.
Guides on configuring the forward-looking sonar system.
Explains user-defined thresholds for safety zones.
Guides on establishing and breaking Wi-Fi connections.
Describes using mobile devices for remote viewing and control.
Explains how to share sonar data for map creation.
Covers configuration options for wireless functionality.
Explains how to set proximity limits for alarm triggers.
Details how to operate a connected FLIR camera.
Explains the process of connecting to a FLIR camera.
Provides access to lists of waypoints, routes, and tracks.
Guides on accessing the online store for charts and content.
Explains how to download and install software updates.
Guides on creating backups of user data and settings.
To Next Page
