Select a favorites page in the pop-up to display it. The panel will switch to the selected
favorite after 3 seconds.
Creating a Man Overboard waypoint
If an emergency situation should occur, you can create a Man Overboard (MOB) waypoint at
the vessel’s current position by selecting the MOB button on the Home page.
You can also save a Man Overboard (MOB) waypoint at the vessel’s current position by
pressing the Enter and Exit keys simultaneously. Simultaneous pressing the Enter and Exit
keys creates a MOB at the vessel's location
When you activate the MOB function the following actions are automatically performed:
• a MOB waypoint is created at the vessel’s position
• the display switches to a zoomed chart panel, centered on the vessel's position
• the system displays navigation information back to the MOB waypoint
Multiple MOB waypoints are saved by repeatedly pressing the MOB buttons. The vessel
continues to show navigation information to the initial MOB waypoint. Navigation to
subsequent MOB waypoints needs to be done manually.
Cancel navigation to MOB
The system continues to display navigational information towards the MOB waypoint until
you cancel the navigation from the menu.
Delete a MOB waypoint
1. Select the MOB waypoint to activate it
2. Tap the MOB waypoint's pop-up or press the Enter key or the rotary knob to display the
MOB waypoint dialog
3. Select the delete option in the dialog.
A MOB waypoint can also be deleted from the menu when it is activated.
Screen capture
Simultaneously press the Home and Power keys to take a screen capture. Screen captures
are saved to internal memory.
You need to turn on the Screen capture option in the System Settings dialog to be able to
take a screenshot on a touch screen. When the function is activated, you can take a
screenshot on a touch screen by double-selecting the title bar of an open dialog, or by
double-selecting the status bar if no dialog is open.
To view files, refer to "Files" on page 120.
18
Basic operation | NSS evo3 Operator Manual