Need help?Do you have a question about the Simrad NSS evo2 and is the answer not in the manual?
General| Display Size | 7", 9", 12", 16" |
|---|---|
| Radar Support | Yes |
| Chartplotter | Yes |
| Autopilot Compatible | Yes |
| NMEA 0183 | Yes |
| Video Input | Yes |
| Operating Temperature | -15°C to +55°C (5°F to 131°F) |
Explains the elements displayed on the chart panel.
Details available chart data sources and compatibility.
Operates the cursor for selection and measurement.
Defines a path by connecting waypoints.
Defines and uses waypoints for navigation.
Creates and navigates along predefined paths.
Guides vessel movement to points or along routes.
Shows data like route, heading, bearing to next waypoint.
Directs the vessel to a point indicated by the cursor.
Starts navigation along a selected route.
Configures navigation parameters and behavior.
Controls the vessel's steering automatically.
Engages the autopilot and selects a mode.
Details available autopilot steering modes.
Steers to waypoints or routes using GPS data.
Configures autopilot behavior and options.
Details elements of the radar display.
Sets the radar scanner's operational state (Off, Standby, Transmit).
Optimizes radar display using sensitivity and filters.
Tracks multiple radar targets for collision avoidance.
General settings for radar display and functionality.
Explains the elements of the echosounder display.
Magnifies the echosounder image.
Operates the cursor for target measurement and marking.
Marks echosounder targets as waypoints.
Configures display settings for the echosounder image.
Selects transducer frequencies for optimal sonar performance.
Adjusts color palettes and signal sensitivity.
Configures echosounder source, logs, and search depth.
Explains the StructureScan display and its components.
Adjusts zoom level for StructureScan images.
To Next Page