Master volume control
By default the volume for all speaker zones are adjusted when you adjust the volume. You
can define which zones will be altered when you increase/decrease the volume.
Selecting tuner region
Before playing FM or AM radio, and using a VHF radio, you must select the appropriate region
for your location.
Detaching Sirius from the AUX source
If a Sirius radio is connected to the FUSION radio/server, the AUX source is automatically
attached to the Sirius feed. Sirius then appears in the source list when the FUSION server is
active.
To use the AUX source for a different device, the Sirius must be detached from the AUX
source.
Ú
Note: To use SiriusXM, an optional SiriusXM tuner must be connected to the FUSION
server.
Operating the audio system
1. Select the Audio tile in the Instrument bar to activate the Audio overlay
2. Select the options icon and then select the audio server
3. Select the source icon and then select the audio source
-
Number of sources depends on the active audio server
4. Use the panel buttons to control your audio system
For an overview of audio control buttons and tools, refer to "Audio control buttons" on page 107
and "Audio Tools" on page 107.
For available options, refer to the documentation following your audio equipment.
Favorite channels
When a tuner or VHF channel is tuned in, you can add the channel to your favorite list. The
favorite channels can be viewed, selected and deleted from within the Favorite list.
You page through favorite channels by using the up/down audio panel buttons.
Sirius radio (North America only)
Channels list
The channels list displays all available Sirius channels, whether or not you have a subscription
for the channel.
Favorites list
You can create a list of your favorite Sirius channels from within the channels list. You cannot
add unsubscribed channels.
Locking channels
You can lock selected Sirius channels from being broadcasted. A 4-digit-code must be
entered to lock channels and the same code entered to unlock the channels.
108
Audio| NSS evo2 Operator Manual
To Next Page
Loading...
Need help?
General
