Name: Simrad NSS evo3
Brand: Simrad
Rating: 5 (1 reviews)

To Next Page

To Previous Page

The Edit Route dialog

You can add and remove routepoints from the Edit Route dialog. This dialog is activated by

selecting an active route's pop-up, by pressing the rotary knob, or from the menu.

The dialog can also be accessed by using the Waypoints tool on the Home page.

Tracks

Tracks are a graphical presentation of the historical path of the vessel, allowing you to retrace

where you have travelled. Tracks can be converted to routes from the Edit dialog.

From the factory, the system is set to automatically track and draw the vessel's movement on

the chart panel. The system continues to record the Tracks until the length reaches the

maximum points, and then automatically begins overwriting the oldest points.

The automatic tracking function can be turned off from the Tracks dialog.

Creating new Tracks

You can start a new trail from the Trails dialog, activated by using the Waypoints tool on the

Home page.

Tracks settings

Tracks are made up of a series of points connected by line segments whose length depends

on the frequency of the recording.

Note: The Tracks option must also be turned ON in the chart settings to be visible.

Waypoints, Routes, and Tracks | NSS evo3 Operator Manual

Other manuals for Simrad NSS evo3

Questions and Answers:

Need help?

Do you have a question about the Simrad NSS evo3 and is the answer not in the manual?

General