Need help?Do you have a question about the Simrad EK80 and is the answer not in the manual?
General| Type | Scientific echosounder |
|---|---|
| Depth Range | Up to 3000 meters |
| Operating Temperature | -15°C to +55°C |
| Humidity | Up to 95% non-condensing |
| Power Output | Up to 2 kW |
| Pulse Length | Adjustable |
| Data Output | Ethernet |
| Display | External display options |
| Applications | marine research |
| Connectivity | Ethernet |
| Data Acquisition | Real-time data acquisition |
| Software | Simrad software suite |
Instructions for installing the EK80 software on a computer for system operation.
Procedure to acquire and install a valid software license for EK80 operation with transceivers.
Steps to configure the IP address and subnet mask for Ethernet communication between the Processor Unit and transceiver.
Guide on how to manually install older transducer types into the EK80 software.
Process to establish communication channels by connecting transceivers to transducers and frequencies.
Initial steps to power on the EK80 system for operation, replay, or recording.
Guide to begin regular use of the EK80 system, including setting parameters and ping.
Instructions on how to retrieve and play back recorded echo data files for analysis.
Overview of the EK80's visual elements and how to navigate its interface for efficient use.
Steps for defining file settings and initiating the recording of raw and processed echo data.
Procedure for safely exiting the EK80 program and shutting down the system components.
How to access the built-in help system from dialog boxes or the top bar.
Information on where to find comprehensive end-user documentation for the EK80 system.
To Next Page
