Simrad EK80 - GETTING STARTED WITH THE EK80 SYSTEM; Turning on the EK80 system

12
403825/C
YoucanleaveSubnetmaskblankandselectOK.Whenyouseeanerrormessage
sayingthatthemessagesubnetmaskismissing,selectOKagain.Adefaultsubnet
maskisthenautomaticallygenerated.
4SelectOKtosavetheselectedsettings,andthencloseallthedialogboxes.
5StarttheEK80program.
6OpentheTransceiverInstallationpage.TheTransceiverInstallationpageislocatedin
theInstallationdialogbox.
7UnderTransceiverBrowsing,selecttheIPAddressthatyoujustspeciedforthe
Ethernetadapter,fromthelist.
8Atthebottomofthepage,selectApplytosaveyoursettings.
9Turneachtransceiveroffandon.
ThisforcestheEK80toassignnewIPaddressestoeachtransceiverwithintheselected
IPrange.ThisdoesnotapplytooldGPTtransceivers.Thesehavexed,staticIP
addresses
Installingoneormoretransducers
Newtypesoftransducerswillautomaticallyberecognizedandinstalledinthesoftware.
Oldertypesoftransducersmustbeinstalledmanuallyfollowingtheguidelinesgivenhere.
Context
Thisproceduremustbeperformedeachtimeyouaddorchangetransducer(s)inyoursystem.
Procedure
1OntheSetupmenu,selectInstallation.
2OntheleftsideoftheInstallationdialogbox,selectTransducerInstallation.
3SelectthetransduceryouwishtoinstallfromtheModellist.
4Inserttheparametersforthenewtransducer.Theparametersincludeserialnumber,
installationmethod,orientationandposition(ifonaship).
5SelectAddtosavetheinformationyouhaveprovided.
6Repeatforeachtransducerthatyouwishtoinstall.
Youarenowreadytoconnectthetransducertoatransceiver,usingtheTransceiverpage.
SimradEK80Quickstartguide