Installation | RS20S User Guide
Set the time offset for your region. Choose whether to display time
in 12 or 24 hour.
MMSI and ATIS ID
The MMSI is a unique 9 digit number and the ATIS ID is a 10 digit
number. They are used on marine transceivers that have DSC (Digital
Select Calling) functionality.
• An MMSI remains with a vessel, even if the vessel is sold on.
• An MMSI has 9 numeric digits (xxxxxxxxx). Your MMSI must not
commence with a ‘0’.
• A Group MMSI begins with ‘0’ followed by 8 numeric digits
(0xxxxxxxx).
• A Coast Station MMSI begins with 00 followed by 7 numeric digits
(00xxxxxxx).
• By law, you are not able to change your MMSI once it is entered into
the radio. This is why there is the confirmation screen when entering
the MMSI.
• An ATIS ID is only required in certain EU countries when navigating
some inland waterways. It is usually a different number to your
MMSI.
• If you need to have the MMSI in the radio changed, the radio must
be taken back to your Simrad dealer.
ATIS
Automatic Transmitter Identification System (ATIS) is required for
vessels making VHF transmissions whilst on the inland waterways of
the Regional Arrangement Concerning the Radiotelephone Service
on Inland Waterways (RAINWAT) signatory countries.
RAINWAT is an agreement to implement common principles and
rules for the safe carriage of people and goods on Inland Waterways.
The signatory countries are: Austria, Belgium, Bulgaria, Croatia, the
Czech Republic, France, Germany, Hungary, Luxembourg, Moldova,
Montenegro, the Netherlands, Poland, Romania, Serbia, the Slovak
Republic and Switzerland.
To Next Page
Loading...
Need help?
General
