Simrad RS82 User Manual

Instruction manual
33
E04572
4.3.4.1 Setting up speakers
Speaker levels can be reset by pressing OK to select “SET SPKRS”
in the VHF Items submenu. Press O
K to access the speaker set-
tings submenu and use the
▲ and ▼ keys to select “DEFAULTS”
(see Fig 4.8 above).
Press O
K to reset all speaker settings to default. The display
will show “RESETTING” for 2 seconds.
Press O
N/C to exit this menu level, or use the ▲ and ▼ keys to
select another option.
4.3.4.2 Adjusting independent volumes
To set speakers’ volume levels independently, select “SET
SPKRS” in the VHF Items submenu. Press O
K to enter the
speaker settings submenu and use the
▲ and ▼ keys to select a
station (e.g. “STATION 1”).
Press O
K to initiate independent volume adjustment (see sec-
tion 3.5 for available settings). The radio will now emit a con-
tinuous 500Hz tone via the selected speaker. Adjust the volume
level using the
▲ and ▼ keys and press O
K
to confirm the new
setting, which will be displayed and end the tone.
Press O
N/C to exit this menu level, or use the ▲ and ▼ keys to
select another option.
4.3.5 Lighting modes
The lighting mode allows adjustment of the level of lighting for
the station, the radio or the whole of the network. The chosen
mode can also be stored in separate banks for each individual
station connected to the radio.
In the VHF Items menu select O
K to enter the submenu and
use the
▲ and ▼ keys to select ”LIGHTING”, press OK again.
Use the
▲ and ▼ keys to select either “STATION”, “RADIO” or
“NETWORK” and press O
K. The display will show “SEL STN”,
“SEL RADIO” and “SEL NET”, respectively, to confirm the
choice. These displays will be shown for 2 seconds.
The selected lighting mode will be stored and available when
the radio is turned on next time.

Simrad RS82 Specifications

General

Brand	Simrad
Model	RS82
Category	Radio
Language	English