2
|
RS90S | QuickStart Guide - EN
Operating the radio
All the operating functions of the RS90S are carried out using the handsets. Each
handset contains a microphone, a small internal loudspeaker and various buttons for
controlling the radio. Two types of handset are available:
• Up to four wired handsets can be connected. There must be at least one wired
handset connected to the station one terminal in the installation.
• Up to two wireless handsets can be installed. The wireless handsets communicate
with the transceiver by 2.4 GHz radio communication. The wireless handsets are
powered by internal rechargeable batteries, and are charged by inductive charging
when on the cradle.
¼ Note: When there are multiple handsets, they are synchronized so that there is no
conflict of operation and each display the same information on their screens.
Switching the system ON
1. Press and hold the [X] key on a wired handset until the startup screen showing
version numbers appears.
2. When prompted, press [X] to exit the startup screen and display the main operating
screen.
This switches on the transceiver and the wired handset.
¼ Note: A wireless handset can only switch itself on and off.
Switching the system OFF
• Press and hold the [X] key on a wired handset until the display shows “Release key to
power off.”
Just one handset
1. In standby mode, press [X] on the wired handset until the display shows “Release key
to power off.”
2. Release the [X] key.
More than one wired handset
HS1 (handset 1) has a power-off menu. All other handsets simply power themselves off.
Handset-1 power-off menu:
• SYSTEM
Turns off all handsets and the transceiver.
• HS1
Turns off the handset itself. Displays “SYSTEM IS WORKING” with no backlight.
¼ Note: You can ignore the power-off menu and keep holding down [X] until the
display shows “Release key to power off.”
To Next Page
Loading...
Need help?
General
