SAL R1a Easy Tank User Manual No. 703852
703852A04, SIMRAD SAL R1a Easy Tank User Manual.docx 5 (25)
1.2 Handling
1.2.1 Shipping
Following general rules apply:
Inspection for damage during transport
When the unit(s) arrives at destination, inspection should be performed
immediately to register any damage that may have occurred during transfer
The customer is normally responsible for insurance during the transportation. If
any damage is found, both the insurance company and the shipping agent must be
informed immediately
1.2.2 Storage
After the material, contained in the boxes, has been inspected in the presence of
customer and it has been verified that no damage has occurred, the unit shall be stored
in its original packing until the time of installation. The storage premises must be dry
and well protected.
If the electronic units must be kept in storage for more than one month, it is advisable
to insert hygroscope substances, such as silicone gel salts, in the crates.
1.2.3 Handling
The electrical part should be kept in their packing as long as possible and shall be
unpacked at the place of installation.
The bottom unit shall be unpacked and mounted at the place of installation. It should
not be transported assembled.
The Transducer and particularly the sensor surface must be handled with care.
Under any circumstances, do not cut or alter the length of cable!
To Next Page
Loading...