Simrad TP30 User Manual

ALWAYS AT THE FOREFRONT OF TECHNOLOGY

Simrad TP30 Specifications

General

Type	Tiller Pilot
Power Supply	12V
Operating Voltage	12 VDC
Rudder Feedback	No
Interface	NMEA 0183
Compass	Built-in
Mounting	Tiller

Summary

Simrad Tillerpilot Operation

Engaging Autopilot Mode

Guides users on engaging Autopilot Mode, locking course, and utilizing power steering.

Adjusting Tillerpilot Course

Simrad Tillerpilot Autotack Function

Advanced Simrad Tillerpilot Features

Simrad Nav Mode for Waypoint Steering

Explains how to use Nav Mode for steering to a waypoint using GPS/plotter data via NMEA.

Sail To Wind Mode Operation

Details the Sail To Wind Mode for steering based on apparent wind angle using NMEA wind data.

Using an External Compass with Simrad

Covers integrating an external compass (ECP30) for enhanced accuracy, especially on ferrous hulls.

Simrad Tillerpilot Configuration Options

Entering Tillerpilot Calibration Mode

Adjusting Tillerpilot Gain Settings

Adjusting Tillerpilot Seastate Settings

Simrad Tillerpilot Installation Guide

Physical Fitting of the Tillerpilot Unit

Provides detailed instructions for physically installing the Tillerpilot unit and its components.

Electrical Connections for Tillerpilot

Outlines the necessary electrical connections, wiring, and power supply requirements.

Interfacing Simrad Tillerpilot via NMEA

Explains how to connect NMEA0183 compatible equipment for data exchange.