Need help?Do you have a question about the Simrad NSO and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| GPS | Yes |
| Chartplotter | Yes |
| Sonar Support | Yes |
| Networking | Ethernet, Wi-Fi |
| Waterproof Rating | IPX6 |
| Radar Compatibility | Yes |
| Video Input | Yes |
| Power Supply | 12/24V DC |
Explains how to activate the MOB function for emergency positioning.
Explains how to create and position waypoints and routes.
Introduces the radar panel and its operational modes (Off, Standby, Transmit).
Covers positioning the radar center and setting radar motion.
Details adjusting gain, sea clutter, rain clutter, and rejecting interference for better image quality.
Covers fast scan, STC curve, radar overlay, and setting guard zones.
Explains target symbols, tracking, and target setup options.
Details using the cursor for measurements and positioning EBL/VRM markers.
Explains the initial setup and usage of dual radar systems.
Details the dual range capability of the Broadband 4G™ Radar.
Covers specific controls for the 4G radar, including target separation.
Explains noise rejection and fast scan adjustments for radar performance.
Covers receiving MMSI messages and defining guard zones around the vessel.
Details setting target alarms and viewing information about detected targets.
Describes how to search for and locate other vessels equipped with AIS.
Introduces the echosounder and how to set the display range.
Details scroll speed, zooming, and adjusting color and gain settings.
Covers pausing the echosounder and recording sonar data.
Discusses optional image items, fish echoes, and overlaying StructureScan data.
Introduces StructureScan, how to access its panel, and the DownScan/SideScan image types.
Provides detailed views and labels for DownScan and SideScan images.
Covers changing zoom, range, frequency, clarity, and color settings for StructureScan.
Covers how autopilot status is shown and essential safety advice for its use.
Covers specific autopilot functions for sailboats, including wind vane steering and tacking.
Details tacking in different modes, gybing, and the tack/gybe prevent safety features.
Introduces GRIB weather format and explains its symbols for wind data.
Covers adjusting overlay transparency and setting weather alarms.
Details how to configure and customize alarm settings within the system.
To Next Page
