Need help?Do you have a question about the Simrad NSO evo2 and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| Waterproof Rating | IPX6 |
| Video Inputs | HDMI, Composite |
| RAM | 2 GB |
| Connectivity | Ethernet, USB |
| Mounting | Flush or bracket mount |
| Processor | Quad-core |
| Storage | 16 GB |
| Operating Temperature | -15°C to +55°C |
| Power Supply | 10-32V DC |
| Operating System | Linux-based |
Provides quick access to basic system settings like Night mode, Touch lock, and Brightness.
Instructions on how to power the system on and off using the Power key or Home page.
Describes how to create a MOB waypoint at the vessel's current position for safety.
Describes the elements and features displayed on the chart panel.
Explains how to specify and select different chart types for display.
Explains how to use the cursor for navigation, measurement, and item selection.
Instructions on how to save waypoints at selected locations or vessel position.
Guides on how to create routes by positioning waypoints on the chart panel.
Covers general settings for chart panels, including 3D boat selection and boat settings.
Defines waypoints and covers saving, moving, editing, and alarm settings.
Explains route creation, editing, Autorouting, and Easy Routing features.
Details automatic route suggestion features based on boat size and map data.
Covers creating new tracks and configuring track recording settings.
Describes the Nav and Position panels used for displaying navigation information.
Instructions on starting navigation to a cursor position on any panel.
Explains how to start navigating a route from the chart panel or Route dialog.
Details how to engage the autopilot for navigation when starting a route.
Covers navigation method, arrival radius, XTE limit, and magnetic variation settings.
Explains the feature that automatically detects and records trips.
Highlights safety warnings and the need for a physical standby button.
Explains how to activate the autopilot from any panel using the autopilot tile.
Details various autopilot steering modes like Standby, AUTO, NAV, and WIND.
Covers autopilot settings like Chart compass and locking operation from a unit.
Describes the radar panel layout, including range, orientation, and data bar.
Explains how to select the radar source for display on the radar panel.
Details the available radar operational modes: Off, Standby, Halo light, and Transmit.
Covers adjusting radar sensitivity and filtering echoes using control images and menus.
Explains advanced settings like Noise Rejection, Radar threshold, and Target separation.
Details display options for radar, including symbology, trails, palette, and orientation.
Explains how to define guard zones on the radar image for target alarms.
Details the MARPA function for tracking targets and collision avoidance.
Covers radar settings like symbology, bearings, data bar, and MARPA settings.
Describes the Echosounder image display, including depth, temperature, and bottom.
To Next Page
