SimTech ProFlame 1 - Page 44

Diagram 12
Check to ensure the remote handheld is turned on.
Diagram 11
Verify the receiver switch is set to the remote position. (In center)
Set to Remote Position
(In Center)
Receiver Front Cover
Receiver Switch
Hole marked “PRG” Coding
Button
Thermostat Display Off
Indicates Manual Mode
Remote
Handheld
ON/OFF Button
Up/Down Arrow
Key for Burner or Fan
44
SUREFIRE ELECTRONIC IGNITION SYSTEM
S.I.T. PROFLAME 2 TROUBLESHOOTING
SimTech Proflame II