UNPACKING INSTRUCTIONS
1. Place the unit in the correct upright position before unpacking.
2. Cut the two packing straps.
3. Slide the carton in an upwards motion and it will release from the base.
4. Grip the carry handles located on either sides of the unit and carefully lift until it
slides out of the foam base.
5. Remove the air outlet and take out the
exhaust hose as the picture.
6. Install the exhaust hose on the unit before
operating the unit.
CONTENTS
1 / Air conditioner unit
2 / Remote control
3 / Batteries
4/ Window Kit A
To Next Page
Loading...
