CONTROL PANEL & DESCRIPTION OF FUNCTION
1. POWER KEY
Press to turn unit "ON" or "OFF".
2. FUNCTION
Press this key to select cooling, heating, or dehumidifying.
3. TEMPER ATURE REGUL AT I ON KEY (UP)
During cooling function˖This key raises the preset temperature by 1ć each time it is
pressed and the maximum limit is 30ć.
During heating function˖
This key raises the preset temperature by 1ć each time it is
pressed and the maximum limit is 25ć.
4. TEMPERATURE REGULATION KEY (DOWN)
During cooling function˖This key lowers the preset temperature by 1ć each time it is
pressed and the minimum limit is 17ć.
During heating function˖This key lowers the preset temperature by 1ć each time and
the minimum limit is 15ć.
5. L.E.D. DISPLAY
The display indicates the current setting temperature or the timer setting. When the set
temperature or the timer is adjusted, the new setting is shown then the display returns the
current set temperature.
Ć The display is also used to show error codes should a fault occur, see ERROR
CODES.
To Next Page
Loading...
