Sinclair KJR-120G - Page 20

9. OPERATION
Child lock function
Press the Lock botton for 3 seconds to activate the child lock
function and lock all buttons on the wire controller.
Press the button again for 3 seconds to deactivate the child
lock function.
When the child lock function is activated,the mark appears.
keypad tone setting
Press the buttons Swing and Timer simultaneously for
3 seconds to close the keypad tone.
Press the buttons again for 3 seconds to open the keypad
tone.
16
°C & °F scale selection (on some models)
Press the buttons Back and Copy simultaneously
for 3 seconds will alternate the temperature display
between the
đē scale.
Fan speed
(Lock)
Back/Turbo
Copy/Ifeel
Swing
Timer