② At this moment, last 2 digits of the nixie tube display “01” which means the first group setting begins.
Press “ ” to the next step.
③ By this time, mode icon will flicker and press “ ”to choose timing on mode. Press “ ” to confirm
your choice and go to the next step.
④ By this time, the last 2 digits of the nixie tube will flicker and press “ ” or “ ” to adjust temperature
and set the temperature of the inlet water. Press “ ” to confirm and move to the next step.
⑤ By this time, the first 2 digits of the nixie tube will flicker and press “ ” or “ ” to adjust time of timing
on. Press “
” to confirm and switch to minute setting automatically. The last 2 digits of the nixie
tube will flicker and press “ ” or “ ” to adjust minute setting of timing on.(minimal unit of minute
adjustment: 15 minutes) .
⑥ Press “ ” to confirm. The first group setting is finished and “ ” will be constantly light.
When processing the second timing setting, repeat the 1-2 operation above. When the nixie tube displays
“01” and flicker, press“ ” or “ ” to choose the timing on group. When the nixie tube displays “ 02 ”
which means setting timing on function of the second group.
Refers the timing on setting operation of group 1 to set that of group 2.
● Long press “
” for 3s to return to the previous interface to reset the parameter during setting clock
timing.
b. Timing off setting
① Long press “ ” for 3s in the main interface to enter function interface. Press “ ” circularly to
enter timing off function. “ ” will flicker and press “ ” to enter timing off setting.
② At this moment, the last 2 digits of the nixie tube display “01” which means the first group setting begins.
Press “ ” to the next step.
③ By this time, the first 2 digits of the nixie tube will flicker and press “
” or “ ” to adjust time of
timing off. Press “
” to confirm and switch to minute setting automatically. The last 2 digits of the
nixie tube will flicker and press “ ” or “ ” to adjust minute setting of timing off. Press “ ” to
confirm. The first group setting is finished and “ ” will be constantly light.
④ When processing timing setting of group 2, repeat the 1-2 operation above. When the nixie tube
displays “01” and flicker, press “
” or “ ” to choose the timing off group. When the nixie tube
displays “02”which means setting timing off function of the second group.
Refers the timing off setting operation of group 1 to set that of group 2.
c. Cancel all timing on/off settings
Long press “
” for 3s to enter function interface. “ ” clock icon will flicker and press “ ”
to choose the timing function. “ ” and “ ” flicker simultaneously means choosing to cancel all
timing functions.
Press “ ” to cancel timing settings. “ ” and “ ” both will be extinguished.
16.1.2 Functions of combination key
Force cooling function
Press “
” and “ ” simultaneously for 3s in the main interface to enter into force cooling mode.
The force cooling mode icon will be constantly light.
Press “ ” button and “ ” button simultaneously for 3s to quit force cooling mode. The unit will
enter power off mode automatically when quitting force cooling mode.
16.1.3 Auto-lock(unlock) function
If don’t operate the controller in 60s, the keyboard will lock automatically. Press “
”and “ ”
To Next Page
Loading...
Need help?
General
