Sinclair SDV5 Series User Manual

6
● When heating
adjust the louver downward
■ Adjust the air direction up and down
● Auto-swing
■ One-way cassette type
Press SWING for the louver to swing up and down.
Maximize air
circulation area
Fig.4-3
4. ADJUSTING AIR FLOW DIRECTION
NOTE
● When cooling
adjust the louver horizontally
■ Four-way cassette type
Fig.4-1
Fig.4-2
● Maintain a proper air distribution.
Air outlet louvers should be used to adjust the direction of outlet
airflow, as doing so might ensure more efficient operation.
● Avoid too much outdoor air coming into air-conditioned
spaces.
Close doors and windows.
● Note that outlet air is cooler or heater than set room
temperature.
Avoid direct exposure to outlet air as it may be too cool or hot.
This applies especially to children, the elderly, and people with
disabilities.
Do not set
the temperature
too low
Since warmer air rises and cooler air falls, the distribu-
tion of warmed/cooled air around a room can be
improved by positioning the unit's louvers. The louver
angle can be adjusted by pressing the [SWING] button
on the remote controller.
During heating operation, horizontal airflow will aggravates
the uneven distribution of room temperature.
The louver direction:
Horizontal airflow is recommended during cooling operation.
Note the downward air flow will cause condensation on the air
outlet and louver surface.
■ Adjust the air direction up and down
● Auto-swing
Press SWING for the louver to swing up and down.
● Manual swing
Adjust the louver to improve the cooling or heating effect.
● Manual swing
Adjust the louver to improve the cooling or heating effect.

Sinclair SDV5 Series Specifications

General

Brand	Sinclair
Model	SDV5 Series
Category	Air Conditioner
Language	English