Prior to initial use
Prior to initial use Unpacking
14
Risk of damage!
If you open the packaging without due care and attention using a
sharp knife or other pointed objects, the appliance may become
damaged.
1. Remove the appliance and accessories from the packaging.
2. Carefull remove all packaging material (also a cover underneath
the water tank) and pull the power cable completely out of the
compartment on the back.
3. Check whether the delivery is complete (refer to Fig. A).
4. Check whether the espresso machine or individual parts are
damaged. If this is the case, do not use the espresso machine.
Contact the manufacturer via the service address stated on the
warranty card.
5. Before using the appliance for the first time, check whether the
voltage specification on the rating plate corresponds to that of your
household.
6. Clean the appliance with a slightly dampened cloth prior to initial
use, in order to remove possible packaging and production
residues.
Rinse off the following parts under flowing water prior to first-time
use:
- Water tank and lid
- Filter holder and filters /
- Tamper
To Next Page
Loading...
