Use
Hot water function
32
Scalding hazard!
The water discharged from the steam nozzle/hot water nozzle is
very hot. You may scald yourself.
1. Connect the power plug to a socket. A beep tone sounds.
2. Press the ON/OFF button.
The grinding mechanism standby indicator lights up and the
HOT-WATER buttons , the button for single espresso and
the button for double espresso slowly dim on/off.
After approx. 20 seconds, the heating process is completed and the
buttons light up constantly.
3. Press the HOT-WATER button . The button flashes slowly
on/off. The buttons for single and double espresso will go out.
4. Hold an empty cup under the steam nozzle/hot water nozzle.
5. If you want to stop the preparation of hot water, press the button
again.
Empty drip tray
The drip tray has an emptying display .
If the emptying display protrudes out of the drip tray, you must
empty the drip tray.
To Next Page
Loading...
