About the grinder
21
For a new user, we suggest to use
settings 7-10 initially, and then make
corresponding adjustments
according to the coffee extraction
situation and the pressure shown by
the pressure gauge.
Why is it slow to dispense ground
coffee at settings 1-3?
This is a normal phenomenon,
because the burr and body are
engaged , the ground coffee is very
fine and very slow to dispense, and it
is not suitable for brewing coffee.
Note that the grinder cannot grind
coffee beans for a long time at
settings1-3.
Why is it provided with settings 1-3?
Considering the service life of the
grinder, the burr and body will be
worn for long use, and the clearance
between them will increase. in this
case the settings1-3 may be
reserved for normal use. This is to
improve the service life of grinder.
To Next Page
Loading...
