Prior to initial use
19
8. Press the ON/OFF button . The grinding mechanism standby
indicator lights up. The ON/OFF, HOT-WATER , single
espresso and the button for double espresso will slowly dim
on/off.
After approx. 20 seconds, the heating process is completed and the
buttons light up constantly.
9. Press the button for double espresso . The button flasher
slowly on/off. The HOT-WATER buttons and the button for single
espresso go out.
The defined water quantity for a double espresso will now run
through the filter holder into the draining rack.
After this, all of the buttons will light up again
10. Press the HOT-WATER button . The button flashes slowly
on/off. The buttons for single and double espresso will go out.
ON/OFF
HOT-WATER
SINGLE
DOUBLE
ON/OFF
HOT-WATER
SINGLE
DOUBLE
To Next Page
Loading...
