16.15 Associating this machine with an Android/iOS terminal using NFC
16
[Web Management Tool] 16-30
2
Place the Android terminal on the mobile touch area on the Control Panel of this machine.
% If the Android terminal is in the sleep mode (the screen is off) or the screen is locked, cancel the
sleep mode of the Android terminal, unlock the screen, then place the Android terminal on the mo-
bile touch area.
% When both Mobile for Android and Remote Access are installed on the Android terminal, the ap-
plication, whichever has priority, is started. For details on the setting, refer to page 16-30.
This starts a pairing with this machine, and registers this machine in Mobile for Android.
Tips
- For details on the procedure, refer to the help of Mobile for Android.
- If the printable screen such as the Web browser or E-mail screen is displayed in advance using Mobile
for Android, you can directly print it on this machine simply by placing the Android terminal on the mo-
bile touch area on the Control Panel of this machine.
- Also, if the scannable screen is displayed in advance using Mobile for Android, you can import the
original loaded on this machine to the Android terminal simply by placing the Android terminal on the
mobile touch area on the Control Panel of this machine.
Connecting an Android terminal to this machine via NFC using
Remote Access
This section describes how to connect an Android terminal to this machine using Remote Access by placing
the Android terminal on the mobile touch area on the Control Panel of this machine.
0 On this machine, allow a connection from an Android terminal using Remote Access. For details, refer
to page 16-24.
0 Enable the wireless connection and NFC for the Android terminal.
0 Configure a setting to support NFC on this machine. For details, refer to page 16-29.
0 When using NFC to connect an Android terminal to this machine using Remote Access, connect the
Android terminal to this machine or the access point that can be connected to this machine in advance.
1
Start the Android terminal.
2
Place the Android terminal on the mobile touch area on the Control Panel of this machine.
% If the Android terminal is in the sleep mode (the screen is off) or the screen is locked, cancel the
sleep mode of the Android terminal, unlock the screen, then place the Android terminal on the mo-
bile touch area.
% When both Mobile for Android and Remote Access are installed on the Android terminal, the ap-
plication, whichever has priority, is started. For details on the setting, refer to page 16-30.
This starts a pairing with this machine to automatically connect the Android terminal to this machine.
Tips
- For details on the procedure, refer to the help of Remote Access.
- If the primary start mode is set to [Address Link] to start Remote Access via NFC, the Android terminal
is not connected automatically. When you place the Android terminal on the mobile touch area on the
Control Panel of this machine, network information of this machine is automatically input to Remote
Access; therefore, you need to manually connect the Android terminal to this machine.
Configuring the application to be started on the Android terminal
If both Mobile for Android and Remote Access are installed on the Android terminal, select whether to pref-
erentially start either application when the Android terminal is placed on the mobile touch area on the Control
Panel of this machine.
In the administrator mode, select [System Settings] - [System Connection Setting] - [Mobile Connection Set-
tings] - [Touch Connection Link Application Settings], then click [PageScope Mobile] or [bizhub Remote Ac-
cess].
[PageScope Mobile] is specified by default.
[Mobile] or [Remote Access]
[Mobile] is specified by default.
To Next Page
