User Manual of A90 Series Inverter
64
The table below provides the details of the function code table:
F00.00 to F99.99: function code number
Full name of the function code. “Reserved” means that the corresponding
function code is temporarily reserved and has no practical meaning.
Brief description of the function code. It is mainly divided into the following
three types:
The value of the integral function code represents the current
parameter selection or meaning.
The ones, tens, hundreds, thousands and tens of thousands
represent one option or the current meaning of the function
code.
Each binary bit represents one option or the current meaning
of the function code.
Metric units of the function code. The units and abbreviations are as follows:
★
: %: The benchmarks are different for physical quantities; kWh: Kilowatt
hour, commonly known as the degree.
Function code settings before delivery, or values after parameter restoration
(F12.14=1). This is mainly described by the following three categories.
Refer to each power segment. The function code is set to
the current value by default.
Depending on
the motor type
The default setting of this function code varies based on
the power segments.
The default setting of this function code varies based on
the power segments and batches.
Change attribute of the function code (permission and condition of change),
as described below:
Changeable in running: The current function code can be
changed in any status.
Non-changeable in running: The current function code can be
changed except in the running status.
To Next Page
Loading...
Need help?
General