User Manual of A90 Series Inverter
98
0: do not lock
1: reference input not locked
2: all locked, except for this
function code
Load speed display
coefficient
UP/DOWN
acceleration and
deceleration rate
0.00: automatic rate
0.01~500.00
Options of
UP/DOWN offset
clearing
0: do not clear
1: clear in non-running state
2: clear when UP/DOWN invalid
Options of
UP/DOWN
power-down saving
of offset
0: do not save
1: save (valid after the offset is
modified)
Restoration of default
setting
0: No operation
1: restoration of factory defaults
(excluding the motor parameters,
inverter parameters, manufacturer
parameters, running and power-on
time record)
Cumulative power-on
time h
Cumulative power-on
time min
Cumulative running
time (min)
Dependi
ng on
the
motor
type
Rated voltage of
inverter