STRAIGHT STITCHING (Continued)
KEEPING THE SEAM STRAIGHT
As you stitch, use one of the numbered
lines on the needle plate as a guide for
keeping the seams straight. Numbers in
dicate distances in eights of a cm from
the needle. If you want a 1.5 cm seam, for
example, keep the righthand edge of your
fabric on the number 5 guideline.
Using Guidelines
Fabric after Turning
Pivoting at Corner
TURNING SQUARE CORNERS
To turn a square corner 1.5 cm from
the fabric edge, you need not measure
or mark thé seam. Simply use the
crosslines on the slide plate.
• Line up your fabric with right or left
guideline 5 on the needle plate. Stitch
seam, slowing speed as you approach
corner.
• Stop stitching, with the needle down,
when the bottom edge of the fabric
reaches the cornering crosslines on the
slide plate.
• Raise presser foot ^and turn fabric on
needle, bringing bottom edge of fabric
in line with guideline 5.
• Lower the presser foot and stitch in new
direction.
20
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
