8. To disconnect, turn all controls to the off (”0”) position, then
remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
10. Keep fingers away from all moving parts. Special care Is
required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can
cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the
needle causing it to break.
14. Switch the sewing machine off (”0”) when making any
adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser
foot, and the like.
15. Always unplug sewing machine from the electrical outlet
when removing covers, lubricating, or when making any
other user servicing adjustments mentioned in the instruc
tion manual.
16. Machine has be stored in dry and clean rooms to protect
against rust.
SAVE THIS INSTRUCTION
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
