Singer 1410 - Sewing with a Twin Needle

SEWING
WITH
A
TWIN
NEEDLE
Pretty
colored
patterns
can be made
by
sewing with
a
-
twin needle
and
different-colored
threads.
1.
Set
the pattern
selector
in
the range
of
otherwise
a
needle
may
hit the
needle
plate.
2.
Insert
the
twin needle
in
the
same way
as a
single
one (flat
side
away
from
you).
Place
two
spools
of threads
on
the
spool
pins.
3.
Pass
both
threads
upto
face plate
thread
guides
as
for
single
needle
stitching.
4.
Separate
the
threads
on
needle
bar
thread guides
and
needle eyes.
Note:
Be
sure
to
place
the two
round felts
provided
in
the
accessories
over
the spool
pins.
To
turn
a
corner
with
a
twin
needle,
you
have
to
take
the needles
out
of the
fabric, otherwise
the
twin
needle
will break
or
bend.
Presser
foot
zigzag
foot
Pattern
selector
0—2
(zigzag
width
less
than “ —
make)
Stitch
length
dial
0.5
tol
—20—