B
3
To secure the beginning of a seam, sew a few stitches forward,
press down and hold the reverse sewing lever (A). Sew a few
stitches in reverse. Release the lever and continue sewing
forward. (1)
To secure the end of a seam, stop stitching at the end of the
seam, press down and hold the reversing lever (A). Sew a
few stitches in reverse, release the lever and sew forward to
the end of the seam. (1)
Turn the handwheel counterclockwise to bring the thread take
up lever to its highest position, raise the presser foot and
remove work behind (2)the needle and presser foot.
Pull the threads behind the presser foot. Guide the threads to
the side of the face plate and into thread cutter (B). Pull
threads down to cut. (3)
Removing the work
Cutting the thread
12
GB
Reverse sewing
A
32
To Next Page
Loading...
