58
GB
Multi-stitch zig-zag
Sewing on lace and elastic, darning, mending, reinforcing edges.
Set the stitch pattern dial to "E" " ".
Place patch in position. The stitch length can be shortened to
produce very close stitches. (1)
When mending tears, it is advisable to use a piece of backing
fabric to reinforce. The stitch density can be varied by adjusting
the stitch length. First sew over the center and then overlap on
both sides. Depending on the type of fabric and damage, sew
between 3 and 5 rows. (2)
Set machine as illustrated on left.
1
2
To Next Page
Loading...
