Singer 457 - Page 37

Stitching Welting into Seams
1 . Adjust zipper foot to the
right
of
theneedle so that the bulk of the
fabric will fall to the left .
? . Stitch «welting to the right side of
a single
seam
edge
; guide the
edge of the
foot next to the cord
but do not crowd .
:3 . Place the attached
welting over
the second seam edge, and pin or
haste together .
4 . Place the work under the needle,
with the
first stitching on top so
that ,you can use it as a
guide .
:5 . Stitch, this time crowding
the foot
against the cord .
Making a Corded Seam