Singer 670 - Zipper Insertion

The zippr Foot
This loot
has been designed
to facilitate the
placing of stilch-
ing
close to a
raised edge.
The hinged
feature of
this foot
ensures
even feeding
over
pins,
heavy
layers of
fabric
or
cross seams.
It is attached to the mactine
in place of the
regular presser
foot and can be adjusted to either the right
or left side of the needle.
Straight or zig-zag stiltc settings
can be used.
Applications: Zipper
insertion, corded
seams, tubular welting
and slip cover welting.
Zipper Insertion
Stitdh Pattern Selectors: AK
Stich Width Selector: 3
Throat Plate: General Purpose or
Straight Stitch
Zipper Foot
Many different types of zippers are available Secure
the zipper fool to the presser bar as
for everything you sew There
are several you would
the regular presser foot. Adjust-
satisfactory
methods for insertion.
Detailed inent to
the right or left of
the needle is
sewing instructions are
included in the zipper moude
by loosening the thumb screw
at the
package. For any method used, the
zipper back of the foot. Check
the position of the
foot enables you to form
an even line of foot by lowering the needle
into the side
stitduing
close to the
zipper,
notch of the
foot, making sure
it clears the
When
the
zipper
is
to
the
right
of
the
needle,
foot.
Lods
into
position
by
tightening
the
adjust
the zipper
ft to
the rgt
of the needle.
thumb
screw.
adjust the zipper foot to the left of the needle.
When the
zipper is to the left of the needle,
adjust the zipper foot
to the right of the
needle.
62