Singer 7256 - HELPFUL MESSAGES; INTERPRETING AND RESOLVING HELPFUL MESSAGES

32
HELPFUL MESSAGES
If an incorrect operation is made, a helpful message will be displayed. When
a helpful message is displayed, fix the problem following the instructions
below.
Bobbin winder is moved to right (operating position) during sewing.

Check bobbin winder and move it to left.
Buttonhole lever is not lowered or raised.

Lower buttonhole lever when sewing buttonholes.

Raise buttonhole lever when sewing stitch patterns.
Foot control plug is pulled out, while operating foot control.

Push in foot control plug.
Machine is locked up due to thread entangled with bobbin case or rotation
interrupted forcibly.

Turn off power switch and eliminate the problem that caused the machine
to stop.
Reverse/tacking stitch button is pushed, while buttonhole stitch is selected.

Tacking stitch is made automatically after buttonhole stitch is completed.
It is not necessary to push the reverse/tacking stitch button.
Bobbin winder is in operation.

Move bobbin winder to left when it is not used.