Singer SGR-600LED - Post-Ironing Procedures and Cautions; Safety Cautions; Ironing Station Storage

10
ENGLISH
Caution:
1) Do not touch hot soleplate before cooling down!
2) Never direct the steam at people!
7. After ironing, press down the ON/OFF switch for a while and the appliance will be turned off,
all the indicators will be extinguished. Remove the plug from the wall socket. But the soleplate
is still hot, never touch it.
8. After cooling down, you can place the iron onto the thermal insulating cushion according to
the following operation: fi rstly, you can insert the back of the iron into the rear support hook,
then put the soleplate on the locking pin and press the locking pin down, and then you can
rotate the iron clockwise until the iron is fi xed into the front support hook (see Fig. 2). At this
time, the iron can be secured onto the thermal insulating cushion.
Fig. 2
Caution: During the operation or after fi nish ironing, never place the hot soleplate on any
area except the thermal insulating cushion. (See Fig.3)
Fig. 3