Table of Contents Previous Page | Next Page
TT700
24
SPECIAL EDITION FOR ADJUSTING TENSION
• Please note the needle thread tension dial can be rotated 9 full circle turns (From MIN to
MAX).
An easy way to have a balanced stitch is to turn the tension dial to the half-way position
(4 or 5 full circle turns from the MIN position).
If you have difficulties in adjusting tension, follow instructions below:
• Turn the tension dial counterclockwise to
MIN position until it stops.
• Turn clockwise & count the number of cir-
cles you turn until it reaches 4 or 5 full circle
turns (a half-way position)
• Make a test sample to find proper tension
before sewing on your fabric.
• Some threads and fabrics require readjust-
ing tension slightly to improve stitch appear-
ance.
• Always double check threading before
attempting to adjust thread tension.
• Refer to Page 12, for detail adjusting ten-
sion instructions.
• The bobbin case tension is pre-set at the
factory and cannot be adjusted. DO NOT
TOUCH THE TENSION SPRING.
To Next Page
Loading...
