47
BeatBuddy Manual
Changelogs
More MIDI Commands
We’re continuing to implement more functionality into the BeatBuddy in
preparation for our upcoming pedals. These changes include:
1. Separate Pause / Unpause message
2. CC:111 data == 0 : pause
3. CC:111 data == 1 : unpause
4. CC:111 data >= 2 : toggle between pause and unpause
Other Changes
1. Improvements to the memory management system
2. Half/Double time now changes at the end of a measure
3. Half/Double time mode resets when a new song is loaded
Bug Fixes
1. Potentially fixed the “no audio” bug
2. Fixed bpm screen that is always visible when changed by MIDI
3. Fixed broken sleep mode
4. Prevented useless bpm/tempo page popups
2.7.0
• Implemented Double / Half time. (But needs to be changed to be triggered
EOM)
2.6.0
• Added Enabled/Disable Outro part setting option
• Round TAP tempo to avoid not-integer BPM
• Add Tempo control with custom CC message
o CC:80 for increment
o CC:81 for decrement
o The increment size follow the value of the command.
• Adjusted the TAP tempo speed to the current times signature
• Implemented “previous part” on CC:113 when value is 126
• Fix potential bug with MIDI merge
• Change Tempo UI screen
• Add dedicated tap tempo behaviour
o If TAP tempo screen was not brought-up using a long press on the
main pedal, event from the main pedal are forwarded to the
SongPlater and the screen is brought back to Home Screen
• Forced the UI to switch to the BPM screen when switching tempo
To Next Page
Loading...
