10/12
12. Set the IP and Port
Command: 804+password+Blank+IP+Blank+Port
Sample: 8040000 45.112.204.242 8090
Reply: SET OK
13. Set the time interval
Command: 809+password+Blank+T
Sample: 8090000 30
Reply: SET OK
T means the time interval, the unit is second,
It from 0 to 180 seconds,
When T=0 means close GPRS.
The minimum time interval is 10 seconds.
14. Sleep Mode
Command: SLEEP+password+Blank+T
Sample: SLEEP0000 5
Reply: SET OK
The tracker will sleep when the vehicle stopped for 5 minutes.
SLEEP0000 0
To close the sleep mode, the tracker will work all the time.
To Next Page
Loading...
