Sinotrack ST-900M - Remote Control and System Settings; Call Mode and Engine Cut-off; APN and IP;Port Reconfiguration

11/24
13. Call mode
Call mode on:
Command: 150+password
Sample: 1500000
Reply: SET OK
Call mode off
Command: 151+password
Sample: 1510000
Reply: SET OK
When the call mode on, the alarms will call and send SMS to control number,
When the call mode off, only send SMS.
14. Cut Engine remotely (ST-901M only)
Cut Engine command: 940+password
Sample: 9400000
After tracker receive the command, it will cut engine and send back SMS “SET
OK”
Recover Engine command: 941+password
After tracker receive the command, it will recover engine and send back SMS
“SET OK”
15. Set APN
Command 1: 803+password+Blank+APN
Sample: 8030000 CMNET
Reply: SET OK
If your APN need user and pass:
Command 2: 803+password+Blank+ APN+Blank+ APN user+Blank+ APN
pass
Sample: 8030000 CMNET CMNET CMNET
Reply: SET OK
16. Set the IP and Port
Command: 804+password+Blank+IP+Blank+Port
Sample: 8040000 45.112.204.245 8090
Reply: SET OK