Sinotrack ST-907 - Remote Engine Immobilization; Configure APN Settings; Set Server IP and Port

10/24
13. Call mode
Call mode on:
Command: 150+password
Sample: 1500000
Reply: SET OK
Call mode off
Command: 151+password
Sample: 1510000
Reply: SET OK
When the call mode on, the alarms will call and send SMS to control number,
When the call mode off, only send SMS.
14. Cut Engine remotely
Cut Engine command: 940+password
Sample: 9400000
After tracker receive the command, it will cut engine and send back SMS “SET
OK”
Recover Engine command: 941+password
After tracker receive the command, it will recover engine and send back SMS
“SET OK”
15. Set APN
Command 1: 803+password+Blank+APN
Sample: 8030000 CMNET
Reply: SET OK
If your APN need user and pass:
Command 2: 803+password+Blank+ APN+Blank+ APN user+Blank+ APN
pass
Sample: 8030000 CMNET CMNET CMNET
Reply: SET OK
16. Set the IP and Port
Command: 804+password+Blank+IP+Blank+Port
Sample: 8040000 45.112.204.245 8090
Reply: SET OK