8
5.3. Over-speed Alarm setting
Over-speed Alarm setting:
Command: 1220000 070
（
Suppose speed is 70km/h
）
Reply: SET OK!
E.g:
When the unit speed is over 70km/h, it will send message “speed
alarm!” to the admin number every 5 minutes.
Over-speed Alarm canceling:
Command: 1220000 0
Reply: SET OK!
5.4. Shake Alarm setting
Command
：
1810000T10
Message Reply: SET OK!
Note: Pls keep the tracker being stationary for 5 minutes, this
function will work. The tracker will send SMS “Shock alarm!” to the
admin number when the unit get shocked.
Shake alarm Canceling:
Command: 1800000
Reply: SET OK!
5.5. Take off Alarm setting (For ST-915L,ST-925L only)
Command：TAKEOFF0000 1
Message Reply: SET OK!
Note: There is anti-removal induction sensor on the back of device. If
this covered induction sensor is not covered again. It will send “Take
off Alarms!” to admin number and SOS number by SMS.
To Next Page
Loading...
