Sinteck Strider STL Link - 3-18 Quick guide for installation and use - Strider Transmitter Link; 100% Operation Verification and Status LEDs

3-18 Quick guide for installation and use - Strider Transmitter Link
Strider Link Series
SRFStrider-161004A-REV.A
Sinteck Sistemas Eletrônicos Ltda.
WORKING 100%
Pressing the button “SEL” after turned on the Strider Transmitter Link is possible to verify if
all menus is working 100% like explained in this section.
STATUS LEDS:
1- Power “ON”
2- PLLlocked “OK”
3- RF power out “OK”
4- Stereo actived
3
FREQ: 454,25 MHZ
CHANNEL 17
FREQ: 454,25 MHZ
CHANNEL 17
03/P/37