To Next PageTo Next Page
Need help?Do you have a question about the Sinteck RPU Link and is the answer not in the manual?
General| Brand | Sinteck |
|---|---|
| Model | RPU Link |
| Category | Transmitter |
| Language | English |
Overview of the Strider Link Series RPU&STL, Reportage Link System, and Studio Transmitter Link.
Technical specifications for the Strider Link Series Composite System.
Technical specifications for the Strider Link Series Monaural System.
Technical specifications for the basic Strider Link Transmitter system without cards.
Technical specifications for the Strider Link Transmitter with an audio processor dual-band card.
Technical specifications for the Strider Link Transmitter with a stereo generator card.
Specs for transmitter with stereo gen, audio processor, and 15kHz filter cards.
Technical specifications for the Strider Link Receiver.
Overview of new and innovative features of the Strider Link Series.
Important safety information including mains voltage, fuses, RF, and toxic hazards.
Description of the Strider Transmitter Link with Multiplexx, audio processor, and stereo generator cards.
Details on AC and DC power supply for the transmitter.
Description of optional audio processor, stereo generator, and 15kHz filter cards.
Overview of Strider Link Receiver series, focusing on Link Receiver and Triple-C.
Description of the receiver's front-end components: preselector, amplifier, and local oscillator.
Details on the receiver's audio/baseband processing and mute/transfer functions.
Receiver metering, status indicators, power supply, and remote control features.
Steps for unpacking, checking, and connecting the Strider Transmitter Link.
Instructions for powering on and initial display messages of the Strider Transmitter.
Overview of the Strider Transmitter's LCD display menus and parameters.
How the transmitter detects and displays the status of Audio Processor and Filter cards.
How the transmitter detects and displays the status of the Stereo Generator card.
Confirmation of PLL lock and display of operating frequency for the transmitter.
Procedure for changing the operating frequency of the Strider Transmitter Link.
Instructions for accessing and adjusting the LCD contrast menu on the transmitter.
Steps to adjust the LCD display contrast level of the Strider Transmitter.
View of measurements for forward and reflected power on the transmitter.
Procedure for adjusting the RF power output of the Strider Transmitter Link.
How to use the composite audio meter to adjust deviation and monitor modulation.
Guidance on correct and incorrect modulation levels to avoid distortion or clipping.
Operating the Channels Left & Right menu for level adjustments.
How the audio processor card affects maximum modulation limits.
How to use the MPX Selection menu to choose internal or external MPX inputs.
How to select between stereo and mono transmission for internal MPX.
Understanding the Stereo ON-OFF status LED on the transmitter.
How to enable or disable the audio processor for external control.
Viewing voltage and current status of the power amplifier module.
Using the Config Hold menu to lock or unlock adjustable parameters.
Understanding the PLL Unlocked alarm and its causes.
How VSWR protection works and detects antenna faults.
How to verify the transmitter is operating correctly using status LEDs.
Steps for unpacking, connecting, and powering on the Strider Receiver Link.
Overview of the receiver's LCD display menus and adjustable parameters.
Understanding the PLL Lock status indicator on the receiver.
Procedure for changing the operating frequency of the Strider Receiver Link.
Instructions for accessing and adjusting the LCD contrast menu on the receiver.
